Die Batteriekapazität: Was steckt wirklich dahinter?

The battery capacity

Electrical energy that a battery can deliver at a specific current (in amperes/A) over a specific period of time (in hours/h). The actual value can be affected by the discharge current, temperature, and the battery's age.
What the ETN number tells you! Reading The battery capacity 2 minutes Next Sulfation

What do the capacity ratings C5, C20 and C100 mean?

It is possible for more than one capacity rating to be specified for a battery. This allows the manufacturer to make it easier for you to compare the capacities of different batteries.

We will use a calculation example to explain the meaning of the different capacity ratings for the same battery:

Capacity rating Meaning
C100

With a discharge time of 100 hours (h), the battery has a capacity of 110 ampere-hours (Ah).

Calculation: 110 Ah / 100 h = 1.1 A

This means that the battery can deliver a current of 1.1 amperes (A) for 100 hours. The battery voltage must still be at least 11.5 volts at the end of discharge.

C20

With a discharge time of 20 hours (h), the same battery has a capacity of 90 ampere-hours (Ah).

Calculation: 90 Ah / 20 h = 4.5 A

This means that the battery can deliver a current of 4.5 amperes (A) for 20 hours. The battery voltage must still be at least 10.5 volts at the end of discharge.

C5

With a discharge time of 5 hours (h), however, the same battery has a capacity of 75 ampere-hours (Ah).

Calculation: 75 Ah / 5 h = 15 A

This means that the battery can deliver a current of 15 amperes (A) for 5 hours. The battery voltage must still be at least 10.2 volts at the end of discharge.

Note: A fully charged battery subjected to a shorter discharge time (h) will operate at a higher current (A) and thus have a shorter service life than a battery subjected to a lower current (A) over a longer discharge time (h).


Conclusion

The capacity ratings C5, C20 and C100 describe the same battery under different discharge conditions – and thus provide a realistic picture of its actual performance. If you want to select the right battery, you should always use the capacity rating that corresponds to the intended application. For short, high-load applications, the C5 rating is important; for continuous applications over many hours, the C20 or C100 rating is decisive.

Continue reading

Sulfatierung

Sulfation

Do you see white deposits on your battery? Then it is very likely sulfation. You can read in this post exactly how sulfation can occur an...

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.