Solar Inselanlage – So berechnen Sie die perfekte Größe!

Off-grid solar system – How to calculate the perfect size!

Are you unsure which off-grid solar system is right for your needs? Then we’re here to help, with important guidance to ensure you buy the right off-grid solar system. Read our article to find out what to look for!
The 0% VAT on photovoltaic systems and solar batteries Reading Off-grid solar system – How to calculate the perfect size! 6 minutes Next The 0% VAT on photovoltaic systems and solar batteries

Step 1 – Determine Appliances

As a basis for determining the right solar system, you should know which appliances you want to operate for how long and how many watts they consume.

You can use the following table as an example application. It uses the appliances and the data you should determine before buying an off-grid PV system.

Appliance Watts (W) Amperes (A) Hours (h) per day Watt-hours (Wh) per day Ampere-hours (Ah) per day
Television 50 4.2 2 100 8.4
Lighting 12 1 3 36 3
Refrigerator 60 5 4 240 20
Coffee machine 1000 83.3 0.17 (approx. 10 minutes) 170 14.2
Total consumption 1,122 546 45.6

Next, we will explain how to determine the additional data required.

Determining Amperes (A):

Once you have noted the power consumption in watts (W) of the respective appliance, divide this value by "12" for a 12-volt system or by "24" for a 24-volt system.

Example: 50W / 12V = 4.2A

Determining Total Power Consumption in Watts:

To calculate the total consumption, simply add up all the watt values of the desired appliances.

Example: 50W + 12W + 60W + 1000W = 1122W

Determining Watt-hours:

Watt-hours are calculated by multiplying the power consumption in watts by the desired operating time in hours.

Example: 50W * 2h = 100Wh

Determining Ampere-hours:

By multiplying the determined ampere value of an appliance by the operating time in hours, you obtain the consumption in Ah per day.

Example: 4.2A * 2h = 8.4Ah


Step 2 – Selecting the Complete Solar Set

In our shop, you will find pre-configured complete sets, so you do not need to worry about the size of the solar panels or the right charge controller.

In this step, you only need to consider the continuous power rating of the inverter. This is because the total power consumption in watts of the appliances must not exceed the continuous power rating in watts of the inverter. Otherwise, the connected appliances cannot be supplied with sufficient power via the off-grid solar system.

Example: If all appliances are running at the same time, we calculated a total consumption of 1,122 watts. This means that a 1000-watt inverter would be too small for the required consumption. In this case, we would recommend the next larger set with a 1500-watt inverter.


Step 3 – Choosing the Right Battery Storage

With our complete sets, choosing the right battery is made easier. This is because we have already created a selection of compatible batteries for you directly on the product page of the off-grid solar system complete set. You only need to decide on your desired technology.

If you want to be sure that the proposed battery is really suitable for your purposes, check the capacity required for your project. To do this, consider how long you want to be self-sufficient without sunlight.

How to Calculate the Right Size for Your Battery – Example

We assume 3 days when no electricity can be produced and we need to access our power storage. To do this, we multiply the determined total power consumption in ampere-hours (Ah) by the specified number of days.

Example: 45.6 Ah * 3 days = 136.8Ah

Interim result: We have now calculated the capacity we need for our power requirements as 136.8Ah. However, this would completely discharge the battery. A buffer should always be included in the calculation so that the battery capacity is not fully depleted.

Never Completely Discharge Batteries!

Different battery technologies should not be discharged to 0%, as this can lead to faster wear or even premature failure of the battery. Deep discharge should be avoided, and a certain depth of discharge should be added to the previous calculation. With our power supply batteries, you will always find information on the recommended and maximum depth of discharge.

How to Determine the Optimal Capacity of Your Battery

In the example, we assume that the battery may be discharged to a maximum of 30%. The determined capacity (Ah) is therefore multiplied by a factor of 1.3.

Example: 136.8Ah * 1.3 = 177.8Ah

Conclusion: Ideally, you need a battery with at least 177.8Ah capacity (C20). Our recommendation for this would be the BIG Power Grid Solar Set 12V 1500W Inverter + 2x 170W Monocrystalline Panels with one of the selectable, proposed batteries.

Note: In our example, the minimum capacity matches the proposed batteries from the solar set selected in Step 2. If the battery has a lower capacity than the compatible batteries in the set, you should opt for the next larger set or a set without a battery and purchase the battery separately.

Tip: Always pay attention to the C-values when checking your battery capacity.


Ordering a Set Without a Battery – Is That Possible?

With us, it is possible to order an off-grid PV system complete set both without and with a battery. You can also use a battery you already have at home. However, you should also check whether the battery you want, which you have selected elsewhere, is a suitable match for the charge controller and solar panels in the set.


Conclusion

If you follow our guide for choosing the right off-grid solar system complete set, you should have no problems with its upcoming use. In addition, our complete sets are very easy to set up yourself. In our tutorials, we show you how it works.

BIG Power Grid Solar Sets – the right choice for your solar energy!

Continue reading

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.